Images are representations only.
GRIMM EDM 107 Hot-Spot Environmental Dust Monitor
Brand: Durag
The Grimm EDM107 dust monitor takes a continuous air sample with a flow controlled pump.
The particles are measured by the physical principle of orthogonal light scattering.
Here particles are illuminated by a laser light and the scattered signal from the particle passing through the laser beam is collected at approximately 90° by a mirror and transferred to a recipient diode.
Each signal of the diode is fed, after a corresponding reinforcement, to a pulse height analyzer then classified to size and transmitted in each size channel.
These counts are converted each 6 seconds to a mass distribution from which the different PM values derive.
Features- Fully automatic
- Portable
- 3 different PMs
- Dehumidification
- Particle size (optional)
- Relative humidity (optional)
- Air temperature (optional)
- Air pressure (optional)
- Data logger card
- RS-232
- Battery operated
Specifications
Brand
Applications
- Mobile, Hotspot, Public Site Monitoring
- Source Identification
- Tunnel Tester
Approvals & Certifications
- TÜV
Battery Life
- Lead Battery: 8 Hours
Communication
- RS-232
Enclosure, Body Material
- Glass Fibre Material, Grey
Flow Rate
- Sample Flow: 2.54 scfh (1.2 L/minute) - Grimm EDM 107 Monitor
Materials of Construction
- Sample Air: PTFE Filter, Optional
Measuring Range
- 0.25 to > 32 µm - Grimm EDM 107 Monitor
Power Supply
- 18 Vdc - Grimm EDM 107 Monitor
- 220/110 V - Grimm #165 Outdoor Housing
Reproducibility
- 3 % inch, Max.
Temperature Range
- -20° to 40° C (-4° to 104° F) - Grimm #165 Outdoor Housing
- 4° to 40° C (39.2° to 104° F) - Grimm EDM 107 Monitor
